Concrete mixing process of batch plant for sale

The quality of the concrete batch plant for sale is related to the mixing quality and efficiency of the concrete mixing equipment. So when we are choosing concrete batch plant, we should pay attention to the mixing performance of the equipment and also on the daily operation.

The main operation points of the mixing process are as follows:
1, The construction site of concrete batch plant for sale should be kept clean, the drainage is smooth, and the relevant signals are connected smoothly.
2, The feeding system should prevent the aggregate from entering the running mechanism; generally the sand and cement cannot be fed in the same pipe; the materials in the hopper, pipe trough and other parts should be unloaded every time, and should not be reserved for the next feeding.
3, The feeding can be carried out once and multiple times. The feeding is to put the materials into the mixer according to a certain process sequence, but it is not allowed to cast the cement first to avoid the cement sticking axis; in order to avoid the cement being wrapped by water to form the cement ball in one feeding The cement and sand should be stirred first to disperse the cement, and then the water is sprayed.
4, It is necessary to control the measurement accuracy and mixing time during operation to ensure that the process requirements are met. And to check for abnormalities and failures, such as leakage of the discharge port, etc., if there are abnormalities and failures, timely maintenance.
5, The concrete must be cleaned before shutdown the concrete batch plant for sale; before the work is completed, apply a small amount of stone and clean the concrete mixer; at the same time, clean the mixing site. When there is a sudden power outage or downtime, care should be taken to clean the concrete in the concrete mixer in time.
6, Any personnel must follow the operating procedures and safety precautions to ensure safe production.